Modern cars are literally stuffed with electronics, which controls various parameters of the engine, warning the driver about the presence of certain problems with the gearbox, engine or any other components and assemblies in the car. Let’s talk in more detail about what warnings on the dashboard should not be ignored, since this can lead to serious car malfunctions up to the need to use the service scrap car removal etobicoke.
Overheating of the engine
The engine cooling system has a special sensor that records the temperature of the coolant and the engine itself. If the engine temperature exceeds the threshold values, a corresponding light on the dashboard lights up, the appearance of which should not be ignored. The main causes of engine overheating are loss of coolant, fan failure, thermostat or water pump failure. If such breakdowns occur on the way, the driver must stop, wait for the engine to cool, then call a tow truck and take the car to the service. Remember that if you continue to move or try to get to the workshop on your own, then this can lead to engine overheating and critical engine malfunctions, which can only be eliminated by major repairs.
Control lamp for oil pressure
The correct operation of the motor and the absence of its critical breakdowns will largely depend on the correct functioning of the lubrication system. If, for some reason, the oil in the engine has high or insufficient pressure, then this can lead to critical engine malfunctions. Poor oil pressure can be caused by a leak in the oil circuit, insufficient oil in the engine, pump malfunction, or damaged bearings. It is strictly forbidden to continue driving the car when the oil pressure warning lamp is on, as in such a case the driver risks serious engine damage.
Insufficient battery charge alarm
Typically, such an insufficient battery charge lamp lights up in cases where there are malfunctions of the generator, after which it no longer charges the battery. While the car is moving, the generator recharges the battery, and then the electric current from the battery is used to start the engine. If the generator fails, then, ultimately, a complete discharge of the battery is noted, and this can lead to a rapid reduction in its service life. The appearance of a burning battery charging warning lamp on the dashboard may indicate a generator breakdown, a broken timing belt, or problems in the electrical circuit. In such a case, the car needs diagnostics, after which it will be possible to determine the existing faults and eliminate them.
The appearance of a burning brake fluid warning lamp
This warning light can come on when the pads are worn, the brake fluid level is low, or the fluid leaks. Remember that, according to safety rules, it is strictly forbidden to continue driving with the brake line warning lamp on, since this invariably threatens with complete brake failure, and most often this leads to serious accidents. It will be necessary to slowly stop on the side of the road, turn on the emergency gang and call a tow truck to deliver the car to the garage or service.
Let’s sum up
When operating the car, the car owner must remember that it is strictly prohibited to ignore and continue driving when the warning lamps for battery discharge, insufficient pressure in the brake line, engine overheating and oil pressure are on. In such a case, the driver risks not only getting into an accident, but also serious damage to the car, which can be eliminated by extremely complex and expensive overhaul.